Tiếng ViệtTextile wastewater treatment
If you are in need of a textile wastewater treatment unit, please contact us for a free survey and consultation.
To learn more about textile wastewater treatment, read the following article carefully.
097 222 1608
Image of fabric after dyeing process
Hasy Environment is a consulting unit, providing wastewater treatment systems with many years of experience in the field of wastewater treatment.
We are confident in meeting the strict requirements given by our customers. Aiming to jointly build and develop sustainable, environmentally friendly sesame production
Expenditures set for a project by Hasy Environment
- Reasonable investment costs
- Meet output standards
- After-sales service commitment
In Vietnam, textile dyeing is one of the strongly developing industries, an industry with high export output, a significant contribution to the state budget and especially has created jobs for many workers. However, during the production process, large amounts of wastewater with high concentrations of pollution are created, affecting the environment and human health. Therefore, building a textile and dyeing wastewater treatment system before discharging into the environment is very necessary.
So let’s learn about the weaving and dyeing process?
To create products with diverse colors for the Textile industry. Behind those colorful products, many production steps are needed. Depending on the type of product, the production process may be different, but basically the weaving and dyeing process is carried out in the following chain:
Image of basic textile and dyeing line diagram
Through this textile and dyeing line, we see that all stages in the textile and dyeing industry generate wastewater, from the sizing, cooking, and bleaching stages to the yarn mercerization, dyeing, printing, and product finishing stages. . Of which, the amount of water used in the production process accounts for 72.3%, mainly in the dyeing and finishing stages.
What are the characteristics and pollutants of textile wastewater?
Textile industry wastewater has unstable Pollution composition. This pollution component changes according to technology and production items. Therefore, determining the composition and properties of wastewater is very difficult. Normally, the pH value in wastewater ranges from 7 to 9. Wastewater has a high temperature of about 40oC, with BOD5 index, COD, color and suspended residue content are many times higher than standards.
Pollution parameters in textile wastewater
Table of pollution parameters of textile wastewater
Choosing textile wastewater treatment technology
The most suitable textile wastewater treatment technology currently chosen is physicochemical technology. This technology also has many advantages and disadvantages. To invest in a textile and dyeing wastewater treatment system with not too high initial investment costs, effective treatment and low operating costs. Hasy environment we offer a solution to textile wastewater treatment using physicochemical technology combined with nano. Below is the process line Textile wastewater treatment technology that we have successfully applied in a number of factories.
Diagram of advanced technology in textile and dyeing wastewater treatment
The technology line is explained as follows:
Collection pit:
Production wastewater is collected by the system and pumped into the equalization tank. The collection pit is the place where wastewater collects. Want to stabilize the flow and concentration of the waste stream. Wastewater is pumped to the conditioning tank and color treatment nano tank.
Here, an air blower is arranged to speed up the cooling process of the wastewater before entering the nano combination physicochemical reactor tank cluster through the air distribution disc system arranged in the tank.
Physical and chemical tank cluster:
Acids or bases are injected. To adjust the pH value to create the most favorable conditions for the flocculation – flocculation process. After that, alum and polymer are injected in a certain amount. In order to increase the size and volume of flocs, creating favorable conditions for the sedimentation process to take place in the sedimentation tank.
Physical and chemical settling tank:
Responsible for settling and separating sludge flocs from wastewater. The sludge after settling in the settling tank is pumped to the sludge dewatering machine.
Ozonation tank:
After treatment, wastewater will be directed to an ozone tank, equipped with ozone to completely eliminate bacteria, and pumped to a water pressure filter tank. The wastewater discharged to the receiving source meets QCVN13:2015/BTNMT, column A.
Textile wastewater treatment system such asHoplex machine
With many years of experience in the field of self-consultation and design and construction of textile wastewater treatment systems and a team of technical masters and industry-leading engineers, Our company will always bring customers satisfaction
Why choose?
HASY environment
- We offer free consultation and design selection costs to customers when constructing with HASY Environment
- With many years of experience in the field of consulting, design and construction of exhaust gas treatment systems
- With a team of professional consultants and designers, dedicated to customers
- On schedule, no costs incurred
- Information confidentiality policy